Quadrox QGuard User Manual Manual de usuario descargar pdf (Pagina 54)

QGuard User Manual 54

Version 4.9 Series

3.3.2.1.2 Configuration

This screen allows you to configure your I/O Device lines as inputs or outputs for the alarm

signals. If you don’t need all of the line(s) you can disable the unused lines.

The screen contains the picture of the I/O Device connector with 13 drop-down lists around it

which correspond to 13 lines of the I/O Device. Each drop-down list has 3 options available:

I, O and X.

Configuration (Picolo I/O Proxy) Screen

Value Description

Configure line as input. This line receives an alarm signal from an

external device.

Configure line as output. This line sends a control signal to the

external device.

Disable the line. This line neither receives, nor sends controls signals.

Click Next to enter the next I/O Device Configuration Wizard Screen.

3.3.2.1.3 Outputs

This screen allows you to assign names to the lines you have configured as outputs.

Outputs (Picolo I/O Proxy) Screen

If you didn’t configure any line as an output, the following message will be shown: “No

outputs are currently configured for this device”. Consequently no configuration will be

available on this page.

Click the Finish button to apply the configuration.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 170 171

Sin comentarios

Quadrox QGuard User Manual Manual de usuario Pagina 54